Product ID:STD SET EPOXY WHITE
MSDS Date:04/07/1988
FSC:8010
NIIN:00N044244
Kit Part:Y
MSDS Number: BSBXB

WHITTAKER CORP

1021 N MISSION RD
LOS ANGELES, CA 90033
US

Emergency Phone: 213-225-4154

Info Phone: 213-225-4154

Cage: 30107

WHITTAKER CORP

LOS ANGELES, CA 90033 US

Telephone: 213-225-4154

Cage: 30107

EPOXY RESIN

CAS: 25036-38-6

Fraction By Weight: 60%

OSHA PEL N/K

ACGIH TLV: N/K

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: <5%

OSHA PEL 10 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

TALC (POWDER) CONTAINING NO ASBESTOS FIBERS; (SILICA, TALC,

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: 25%

OSHA PEL 2 MG/M3 RDUST

ACGIH TLV: 2 MG/M3 RDUST

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INGEST:GI DISTRESS.
SKIN:RPTD/PRLNGD LIQ CONT MAY CAUSE SKIN IRRIT W/DISCOMFORT & DERM.
MAY ALSO CAUSE ALLERGIC SKIN RXNS. INHAL:MAY CAUSE NOSE & THROAT
IRRIT. MAY CAUSE NERV SYS DEPRESS CHARAC T BY THE FOLLOWING
PROGRESSIVE STEPS: HDCH, DIZZ, NAUS, STAG GAIT, CONFUSN & UNCON.
RPTS HAVE ASSOC (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:RPTD/PRLNGD OVEREXPOS TO SOLV W/ PERM
BRAIN & NERV SYS DAM. CHRONIC: TITANIUM DIOXIDE-NO KNOWN HAZ W/NORM
INDUS USE. IN A LIFE-TIME INHALATION TEST, LUNG CANCERS WERE FOUND
IN SOME RATS EXPOS ED TO 250 MG/M3 RESPIRABLE TITANIUM DUST.
ANALYSIS OF TITANIUM DIOXIDE CONC IN RAT'S LUNGS SHOWED THAT LUNG
(SUP DAT)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST:CALL MD IMMED & HAVE NAMES OF INGREDS AVAIL. SKIN:IN
CASE OF CONT, IMMED WASH W/SOAP & PLENTY OF WATER. EYES:IN CASE OF
CONT, IMMED FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS. CALL MD.
INHAL: IF AFFECTED BY INHAL OF VAPOR/SPRAY MIST, REMOVE TO FRESH
AIR. IF NOT BRTHG, GIVE ARTF RESP, PREF MOUTH-TO-MOUTH. IF BRTHG
DFCLTY PERSISTS, OR OCCURS LATER, CONSULT MD.

Flash Point Method:TCC
Flash Point:245F,118C
Extinguishing Media:USE CHEMICAL FOAM, DRY CHEMICAL OR CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL PROT
EQUIP . WATER FROM FOG NOZZLES MAY BE USED TO COOL CLOSED CONTRS TO
PREVENT PRESSURE BUILDUP.
Unusual Fire/Explosion Hazard:WHEN HEATED ABOVE FL PT, EMITS FLAMM
VAPORS WHICH, WHEN MIXED W/AIR, CAN BURN OR BE EXPLOSIVE. FINE
MISTS/SPRAYS MAY BE FLAMMABLE AT TEMPS BELOW FL PT.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE
AREAS. REMOVE MATERIAL W/INERT ABSORBENT & USE NON-SPARKING TOOLS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE BELOW 120F. DOT STOR CATEGORY:
REFERENCE OSHA 1910.106. DO NOT CUT, GRIND, WELD OR DRILL NEAR THIS
CONTR. AVOID EXPOS TO VAPORS.
Other Precautions:GROUND CONTR WHILE POURING. MINIMIZE DISTANCE OF FREE
FALL TO AVOID STATIC ELEC GENERATION. CONTRS, EVEN THOSE THAT HAVE
BEEN EMPTIED, WILL RETAIN PROD RESIDUE & VAPS. ALWAYS OBEY HAZ
WARNINGS & HANDL E CONTRS AS IF THEY WERE FULL. (SUP DAT)

Respiratory Protection:VENTILATE WORKING SPACES TO BELOW TLV. IF LOCAL
EXHAUST NOT AVAILABLE, USE NIOSH/MSHA APPROVED RESPIRATORY DEVICE.
SEE BUREAU OF MINES I.C. 8436 SUPT. OF DOCUMENTS.
Ventilation:LOCAL EXHAUST TO MAINTAIN VAPOR CONCENTRATION BELOW TLV.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPR CHEM SFTY GOGG .
Other Protective Equipment:EYE BATH RECOMMENDED.
Work Hygienic Practices:REMOVE & WASH CONTAMINATED CLOTHING BEFORE
REUSE. DISCARD SHOES IF SATURATED.
Supplemental Safety and Health
KEY1;T6. EFTS OF OVEREXP:CLEARANCE MECHANISM WAS OVERWHELMED & THAT THE
RSLTS AT THE MASSIVE 250 MG/MG LEVEL ARE NOT RELEVANT TO WORKPLACE.
OTHER PREC:WHEN PART A IS MIXED W/PART B, AN EXOTHERMIC RXN OCCURS
WHICH WILL PRDCE TEMPS IN EXCESSOF 200F. ADDNL PROT EQUIP MUST BE
WORN TO PROPERLY HANDLE THIS PROD MIX.

HCC:T6
Vapor Density:HVR/AIR
Spec Gravity:1.37
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, SPARKS & OPEN FLAME.
Hazardous Decomposition Products:MAY LIBERATE CARBON MONOXIDE, CARBON
DIOXIDE & UNIDENTIFIED ORGANIC COMPOUNDS IN BLACK SMOKE.

Waste Disposal Methods:DISPOSE OF WASTE IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS. DO NOT INCINERATE IN A CLOSED CONTAINER.
COMPLY W/ALL APPLICABLE GOVERNMENTAL REGULATIONS ON SPILL
REPORTING.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.